Programmable 150kVA AC Constant Current Source Power with CE

Product Description

Product Description

HCT System AC Constant Current Source

Power Feature

The HCT series AC constant current source is a high-precision current-stabilizing AC power supply featuring low harmonic distortion. It can maintain a constant output current even when the external grid power fluctuates or the impedance characteristics of the load change. It is applicable to products and scenarios requiring tests and applications based on the thermal effect of specific currents, such as tests for circuit breakers, fuses, thermal relays, magnetic starters, coils and other components.

1. High current stabilization accuracy to ensure constant output current.
2.Supports automatic testing for different current levels and cyclic test operations.
3.Capable of driving resistive, inductive and capacitive loads, complying with power supply requirements for low-voltage electrical appliance testing.
4.Delivers constant output current with a pure sine wave output waveform, serving as test equipment for overcurrent experiments.
5.Automatically switches between constant current and constant voltage modes, integrating control and protection functions for comprehensive performance.

Specification

Model	HCT-31100	HCT-31150	HCT-31200	HCT-31300	HCT-31450	HCT-311500	HCT-315000
Rated Power	10kVA	15kVA	20kVA	30kVA	45kVA	150kVA	500kVA
AC Input Specifications
Power Configuration	Three-phase, four-wire + PE
Voltage Range	380V(±15%)
Frequency Range	50/60Hz(±10%)
AC Output Characteristics
Power Configuration	Single-phase, two-wire + PE
Voltage Range	0~20VL-N					0~30VL-N	0~50VL-N/100VL-N
Current Range	0-500A	0-750A	0-1000A	0-1500A	0-2250A	0-5000A	0~10000A/5000A
Frequency Range	Fixed: 50/60 Hz; adjustable: 45–65 Hz
Line Regulation	≤ 0.1%F.S
Load Regulation	≤ 0.1%F.S
Current Accuracy	≤ 0.1%F.S
Frequency Accuracy	≤ 0.01%F.S
Voltage Harmonic Distortion	≤2%
Response Time	≤5ms
Efficiency	≥90%
Overload Capacity	120%–150% for 1 min; 150%–200% for 2 s; ≥ 200%: output shuts down immediately
System Functions
Memory Function	Retains the previous output mode and parameters after power is restored
Protection Functions	Input overvoltage, undervoltage and phase-loss protection; output overvoltage, overcurrent, overload and short-circuit protection; internal overtemperature protection, etc.
Display and Communication
Local Operation	LCD Display
Display Resolution	Voltage: 0.1 V; Current: 0.1 A; Frequency: 0.1 Hz; Power: 0.1 kW
Display Accuracy	Voltage: 0.1% F.S.; Current: 0.2% F.S.; Frequency: 0.01%; Power: 0.3% F.S.
Remote Communication	RS 485/LAN
Communication Protocol	Standard Modbus RTU / Modbus TCP/IP
Safety Performance
Dielectric Strength	2,000 VDC / 60 s / No breakdown
Insulation Resistance	≥ 20MΩ@500Vdc
Grounding Resistance	≤100mΩ
Noise	≤65dB(A)
Operating Environment
Operating Conditions	Continuous 24-hour operation at an ambient temperature of −20°C to 45°C and relative humidity of 0–95%
Cooling Method	Forced-air cooling by fan
Protection Rating	IP20
Altitude	≤ 5,000 m; derating required above 2,000 m
Dimensions (W × D × H), mm	500 × 820 × 1100 (including casters)			520 × 1160 × 1360 (including casters)		1550 × 850 × 1985 (including casters)	2700*1200*2080
Note: Contact sales for more models or customization.

Project Cases

Company Show

Company profile

Shandong Bos Energy Technology Co., Ltd., founded in 1999, is a technology focused enterprise specializing in power supply R&D and manufacturing Centered on inverter technology for over two decades, BOS provides system solutions, with product linesincluding AC/DC test power supplies, AC/DC power supplies, shore power and new energy products.As one of Chinas infuential highpower power supply manufacturers, Bos runs a 20000 square meter production base with an annual output of 20000o units to meetrapidy growing market demands.Taking technological innovation as the foundation of development, BOS invests no less than 10% ofits sales revenue in annual R&D. It explores core technologies such as high power parallel operation and power unit series superposition.

Packing & Delivery

FAQ

Factory, Customization & After sales

1.Q: Are you a manufacturer? 
-- Yes, we have an independent factory covering an area of over 20,000 square meters.
2.Q: Do you support product customization and OEM? 
-- Yes, we can customize products according to your requirements and support OEM services.
3.Q: Is after sales service guaranteed when purchasing products from your store? 
-- Yes. Within the warranty period, we will conduct regular customer follow ps, supply spare parts for maintenance, and provide professional technical support for the whole lifecycle of the product.
4.Q: What about your production management and quality control? 
-- All our production processes comply with ISO9001 standards and CE requirements. We independently complete the production and testing of power supplies, including welding, assembly, wiring, commissioning, quality inspection and high emperature aging cycles. Every production step is controlled by professional operators.